Use of explosion - proof lights

    1.Installation: First, the actual needs of the work site to determine the location of GMD lamps and installation methods, and then according to the distance from the lamp to the power supply to prepare the corresponding length Φ10 ~ Φ14mm three-core cable

  2. Wiring: Loosen the M6 hexagon socket screw on the cover, open the cover of the lamp cover, unscrew the compression nut of the lamp cable inlet, remove the sealing piece, introduce the power cable through the compression nut into the lamp internal terminal , The line connection fixed, and then tighten the cable tightening nut, and then installed the front cover of the lamp.

  3.replace the light source: the replacement of LED and circuit board, open the front cover, turn down the front cover, first remove the reflective cup, and then remove the LED components and circuit boards, put on new LED components and circuit boards, Install the front cover of the lamp.