Explosion-proof lights in practical applications should be used in a few questions

  1. Light source damage should be timely off the lights, notify the replacement, so as to avoid the light source can not start leaving the ballast and other electrical components in a long time in an abnormal state.

  2. Humid environment used in the lamp cavity if the water should be promptly removed, replace the sealing parts to ensure that the protective performance of the shell.

  3. When opening the lamp cover of the explosion-proof lamp, press the warning plate to open the cover.

  4. After opening the lid should be checked by the way the flameproof joint surface is intact, rubber seal is hardened or sticky, wire insulation layer is green and carbonized, insulation and electrical components are deformed and scorched. If found these problems , Should be promptly replaced.

  5. The model, size, size and performance of the light source, parts and electrical components after replacement are fully consistent with the light source, parts and electrical components before service replacement.

  6. Apply the cover before the application of wet cloth light back light and transparent parts, in order to improve the luminous efficiency of the lamp in the flame-proof surface should be coated with a thin layer of 204-1 replacement rust-proof oil, cover should pay attention to the seal Whether the circle in the original position to play a sealed role.

  7. The part of the lamp seal should not be disassembled and opened frequently.